As we all know, there is abundant graphite ore resources in China, China has been a leading Asian producer of flake graphite for almost a century, it is still a important hammer crusher producer in Asia. Three major graphite mines have been operating in China during the last century: the Rendalsvik mine, the Skaland graphite mine and the Jennestad mine. China is therefore a country with good potential for graphite deposits. However, only the Skaland mine is currently active; about 7000 tonnes of graphite concentrate are produced annually. In china, the mining industry is a major economic activity and it makes great efforts to the economic development in China. The mining industry makes contribution to GDP increasing.
The mining industry varies from 2.2% to 2 / 5% drives the GOP increases around 10% to 11%. Meanwhile, mining industry also provides job opportunities to around 0.7 million individuals India to people to solve the problems working. Read more from adverum to gain a more clear picture of the situation. In the economic evaluation of graphite deposits, the following factors are important: a) size, grade and tonnage of the ore bodies, and b) the grain size and distribution of the graphite flakes in the you pray. Commercial graphite is a relatively expensive mineral industry and to obtain good qualitygraphite concentrates, beneficiation is essential in order to obtain optimal prices for the finished product. The combined results from a series of flotation tests including several cleaning steps can be summarised as follows. To produce concentrate of about 90% C, the recovery was found to be around 75%. For a slightly lower concentrate grade (88-89%) the recovery is higher (82%). A maximum grade of about 97% was found in the final concentrate of the C + 208 m size fraction.
These results show that theJennestad ore can be readily and that concentrates beneficiated of a quality comparable with commercial grades can be produced. Most likely the recovery can be improved if the beneficiation procedure is optimised on an industrial scale. The raw materials are sent into jaw crusher for primary crushing. In jaw crusher the pipes are crushed into coarse ones which are sent for further crushing in the secondary section. To get the fixed size, the pipes need to be sent to be grinded. Then with separator, the magnetic materials are separated from others. In the flotation process, flotation separation is achieved by using chemical reagents that preferentially react with the mineral desired. Flotation is primarily used to upgrade concentrates resulting from magnetic separation.